pappso::BasePlotContext Class Reference

#include <baseplotcontext.h>

Inheritance diagram for pappso::BasePlotContext:

Public Member Functions
Q_INVOKABLE	BasePlotContext (QObject *parent=nullptr)
virtual	~BasePlotContext ()
Q_INVOKABLE BasePlotContext *	clone (QObject *parent=nullptr)
Q_INVOKABLE void	initialize (const BasePlotContext &other)
	BasePlotContext (const BasePlotContext &other)=delete
BasePlotContext &	operator= (const BasePlotContext &other)=delete
void	updateIntegrationScope ()
void	updateIntegrationScopeRect ()
void	updateIntegrationScopeRhomb ()
void	updateIntegrationScopeRhombHorizontal ()
void	updateIntegrationScopeRhombVertical ()
DragDirections	recordDragDirections ()
Q_INVOKABLE QString	toString () const
Q_INVOKABLE QString	dragDirectionsToString () const

Static Public Member Functions
static void	registerJsConstructor (QJSEngine *engine)

Public Attributes
Enums::DataKind	m_dataKind = Enums::DataKind::unset
bool	m_isMouseDragging = false
bool	m_wasMouseDragging = false
bool	m_isKeyBoardDragging = false
bool	m_isLeftPseudoButtonKeyPressed = false
bool	m_isRightPseudoButtonKeyPressed = false
bool	m_wasKeyBoardDragging = false
QPointF	m_startDragPoint
QPointF	m_currentDragPoint
QPointF	m_lastCursorHoveredPoint
DragDirections	m_dragDirections = DragDirections::NOT_SET
IntegrationScopeBaseCstSPtr	msp_integrationScope = nullptr
SelectionPolygon	m_selectionPolygon
double	m_integrationScopeRhombWidth = 0
double	m_integrationScopeRhombHeight = 0
QCPRange	m_xRange
QCPRange	m_yRange
bool	m_wasClickOnXAxis = false
bool	m_wasClickOnYAxis = false
bool	m_isMeasuringDistance = false
double	m_xRegionRangeStart = std::numeric_limits<double>::min()
double	m_xRegionRangeEnd = std::numeric_limits<double>::min()
double	m_yRegionRangeStart = std::numeric_limits<double>::min()
double	m_yRegionRangeEnd = std::numeric_limits<double>::min()
double	m_xDelta = 0
double	m_yDelta = 0
int	m_pressedKeyCode
int	m_releasedKeyCode
Qt::KeyboardModifiers	m_keyboardModifiers
Qt::MouseButtons	m_lastPressedMouseButton
Qt::MouseButtons	m_lastReleasedMouseButton
Qt::MouseButtons	m_pressedMouseButtons
Qt::MouseButtons	m_mouseButtonsAtMousePress
Qt::MouseButtons	m_mouseButtonsAtMouseRelease

Properties
bool	isMouseDragging
bool	wasMouseDragging
bool	isKeyBoardDragging
bool	isLeftPseudoButtonKeyPressed
bool	isRightPseudoButtonKeyPressed
bool	wasKeyBoardDragging
QPointF	startDragPoint
QPointF	currentDragPoint
QPointF	lastCursorHoveredPoint
DragDirections	dragDirections
double	xRegionRangeStart
double	xRegionRangeEnd
double	yRegionRangeStart
double	yRegionRangeEnd
double	xDelta
double	yDelta
double	pressedKeyCode
double	releasedKeyCode
Qt::KeyboardModifiers	keyboardModifiers
Qt::MouseButtons	lastPressedMouseButton
Qt::MouseButtons	lastReleasedMouseButton
Qt::MouseButtons	pressedMouseButtons
Qt::MouseButtons	mouseButtonsAtMousePress
Qt::MouseButtons	mouseButtonsAtMouseRelease

Detailed Description

Definition at line 52 of file baseplotcontext.h.

Constructor & Destructor Documentation

BasePlotContext() [1/2]

pappso::BasePlotContext::BasePlotContext ( QObject *  parent = nullptr )

explicit

Definition at line 38 of file baseplotcontext.cpp.

                                               : QObject(parent)
{
  // So we know it is never nullptr.
  msp_integrationScope = std::make_shared<IntegrationScopeBase>();
}

References msp_integrationScope.

~BasePlotContext()

pappso::BasePlotContext::~BasePlotContext ( )

virtual

Definition at line 112 of file baseplotcontext.cpp.

{
}

BasePlotContext() [2/2]

pappso::BasePlotContext::BasePlotContext ( const BasePlotContext &  other )

delete

Member Function Documentation

clone()

BasePlotContext * pappso::BasePlotContext::clone

(

QObject *

parent = nullptr

)

Definition at line 117 of file baseplotcontext.cpp.

{
  BasePlotContext *copy_p = new BasePlotContext(parent);
 
  // copy_p->m_dataKind = m_dataKind;
 
  copy_p->m_isMouseDragging  = m_isMouseDragging;
  copy_p->m_wasMouseDragging = m_wasMouseDragging;
  copy_p->m_dragDirections   = m_dragDirections;
 
  copy_p->m_isKeyBoardDragging            = m_isKeyBoardDragging;
  copy_p->m_isLeftPseudoButtonKeyPressed  = m_isLeftPseudoButtonKeyPressed;
  copy_p->m_isRightPseudoButtonKeyPressed = m_isRightPseudoButtonKeyPressed;
  copy_p->m_wasKeyBoardDragging           = m_wasKeyBoardDragging;
 
  copy_p->m_startDragPoint         = m_startDragPoint;
  copy_p->m_currentDragPoint       = m_currentDragPoint;
  copy_p->m_lastCursorHoveredPoint = m_lastCursorHoveredPoint;
 
  copy_p->m_selectionPolygon            = m_selectionPolygon;
  copy_p->msp_integrationScope          = msp_integrationScope;
  copy_p->m_integrationScopeRhombWidth  = m_integrationScopeRhombWidth;
  copy_p->m_integrationScopeRhombHeight = m_integrationScopeRhombHeight;
 
  // The effective range of the axes.
  copy_p->m_xRange = m_xRange;
  copy_p->m_yRange = m_yRange;
 
  // Tell if the mouse move was started onto either axis, because that will
  // condition if some calculations needs to be performed or not (for example,
  // if the mouse cursor motion was started on an axis, there is no point to
  // perform deconvolutions).
  copy_p->m_wasClickOnXAxis = m_wasClickOnXAxis;
  copy_p->m_wasClickOnYAxis = m_wasClickOnYAxis;
 
  copy_p->m_isMeasuringDistance = m_isMeasuringDistance;
 
  // The user-selected region over the plot.
  // Note that we cannot use QCPRange structures because these are normalized by
  // QCustomPlot in such a manner that lower is actually < upper. But we need
  // for a number of our calculations (specifically for the deconvolutions) to
  // actually have the lower value be start drag point.x even if the drag
  // direction was from right to left.
  copy_p->m_xRegionRangeStart = m_xRegionRangeStart;
  copy_p->m_xRegionRangeEnd   = m_xRegionRangeEnd;
 
  copy_p->m_yRegionRangeStart = m_yRegionRangeStart;
  copy_p->m_yRegionRangeEnd   = m_yRegionRangeEnd;
 
  copy_p->m_xDelta = m_xDelta;
  copy_p->m_yDelta = m_yDelta;
 
  copy_p->m_pressedKeyCode  = m_pressedKeyCode;
  copy_p->m_releasedKeyCode = m_releasedKeyCode;
 
  copy_p->m_keyboardModifiers = m_keyboardModifiers;
 
  copy_p->m_lastPressedMouseButton  = m_lastPressedMouseButton;
  copy_p->m_lastReleasedMouseButton = m_lastReleasedMouseButton;
 
  copy_p->m_pressedMouseButtons = m_pressedMouseButtons;
 
  copy_p->m_mouseButtonsAtMousePress   = m_mouseButtonsAtMousePress;
  copy_p->m_mouseButtonsAtMouseRelease = m_mouseButtonsAtMouseRelease;
 
  return copy_p;
}

References m_currentDragPoint, m_dragDirections, m_integrationScopeRhombHeight, m_integrationScopeRhombWidth, m_isKeyBoardDragging, m_isLeftPseudoButtonKeyPressed, m_isMeasuringDistance, m_isMouseDragging, m_isRightPseudoButtonKeyPressed, m_keyboardModifiers, m_lastCursorHoveredPoint, m_lastPressedMouseButton, m_lastReleasedMouseButton, m_mouseButtonsAtMousePress, m_mouseButtonsAtMouseRelease, m_pressedKeyCode, m_pressedMouseButtons, m_releasedKeyCode, m_selectionPolygon, m_startDragPoint, m_wasClickOnXAxis, m_wasClickOnYAxis, m_wasKeyBoardDragging, m_wasMouseDragging, m_xDelta, m_xRange, m_xRegionRangeEnd, m_xRegionRangeStart, m_yDelta, m_yRange, m_yRegionRangeEnd, m_yRegionRangeStart, and msp_integrationScope.

dragDirectionsToString()

QString pappso::BasePlotContext::dragDirectionsToString

(

)

const

Definition at line 982 of file baseplotcontext.cpp.

{
  QString text;
 
  // Document how the mouse cursor is being dragged.
  if(m_isMouseDragging)
    {
      if(static_cast<int>(m_dragDirections) &
         static_cast<int>(DragDirections::LEFT_TO_RIGHT))
        text += " -- dragging from left to right";
      else if(static_cast<int>(m_dragDirections) &
              static_cast<int>(DragDirections::RIGHT_TO_LEFT))
        text += " -- dragging from right to left";
      if(static_cast<int>(m_dragDirections) &
         static_cast<int>(DragDirections::TOP_TO_BOTTOM))
        text += " -- dragging from top to bottom";
      if(static_cast<int>(m_dragDirections) &
         static_cast<int>(DragDirections::BOTTOM_TO_TOP))
        text += " -- dragging from bottom to top";
    }
 
  return text;
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, m_dragDirections, m_isMouseDragging, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

Referenced by toString().

initialize()

void pappso::BasePlotContext::initialize

(

const BasePlotContext &

other

)

Definition at line 186 of file baseplotcontext.cpp.

{
  m_dataKind = other.m_dataKind;
 
  m_isMouseDragging  = other.m_isMouseDragging;
  m_wasMouseDragging = other.m_wasMouseDragging;
  m_dragDirections   = other.m_dragDirections;
 
  m_isKeyBoardDragging            = other.m_isKeyBoardDragging;
  m_isLeftPseudoButtonKeyPressed  = other.m_isLeftPseudoButtonKeyPressed;
  m_isRightPseudoButtonKeyPressed = other.m_isRightPseudoButtonKeyPressed;
  m_wasKeyBoardDragging           = other.m_wasKeyBoardDragging;
 
  m_startDragPoint         = other.m_startDragPoint;
  m_currentDragPoint       = other.m_currentDragPoint;
  m_lastCursorHoveredPoint = other.m_lastCursorHoveredPoint;
 
  m_selectionPolygon            = other.m_selectionPolygon;
  msp_integrationScope          = other.msp_integrationScope;
  m_integrationScopeRhombWidth  = other.m_integrationScopeRhombWidth;
  m_integrationScopeRhombHeight = other.m_integrationScopeRhombHeight;
 
  // The effective range of the axes.
  m_xRange = other.m_xRange;
  m_yRange = other.m_yRange;
 
  // Tell if the mouse move was started onto either axis, because that will
  // condition if some calculations needs to be performed or not (for example,
  // if the mouse cursor motion was started on an axis, there is no point to
  // perform deconvolutions).
  m_wasClickOnXAxis = other.m_wasClickOnXAxis;
  m_wasClickOnYAxis = other.m_wasClickOnYAxis;
 
  m_isMeasuringDistance = other.m_isMeasuringDistance;
 
  // The user-selected region over the plot.
  // Note that we cannot use QCPRange structures because these are normalized by
  // QCustomPlot in such a manner that lower is actually < upper. But we need
  // for a number of our calculations (specifically for the deconvolutions) to
  // actually have the lower value be start drag point.x even if the drag
  // direction was from right to left.
  m_xRegionRangeStart = other.m_xRegionRangeStart;
  m_xRegionRangeEnd   = other.m_xRegionRangeEnd;
 
  m_yRegionRangeStart = other.m_yRegionRangeStart;
  m_yRegionRangeEnd   = other.m_yRegionRangeEnd;
 
  m_xDelta = other.m_xDelta;
  m_yDelta = other.m_yDelta;
 
  m_pressedKeyCode  = other.m_pressedKeyCode;
  m_releasedKeyCode = other.m_releasedKeyCode;
 
  m_keyboardModifiers = other.m_keyboardModifiers;
 
  m_lastPressedMouseButton  = other.m_lastPressedMouseButton;
  m_lastReleasedMouseButton = other.m_lastReleasedMouseButton;
 
  m_pressedMouseButtons = other.m_pressedMouseButtons;
 
  m_mouseButtonsAtMousePress   = other.m_mouseButtonsAtMousePress;
  m_mouseButtonsAtMouseRelease = other.m_mouseButtonsAtMouseRelease;
}

References m_currentDragPoint, m_dataKind, m_dragDirections, m_integrationScopeRhombHeight, m_integrationScopeRhombWidth, m_isKeyBoardDragging, m_isLeftPseudoButtonKeyPressed, m_isMeasuringDistance, m_isMouseDragging, m_isRightPseudoButtonKeyPressed, m_keyboardModifiers, m_lastCursorHoveredPoint, m_lastPressedMouseButton, m_lastReleasedMouseButton, m_mouseButtonsAtMousePress, m_mouseButtonsAtMouseRelease, m_pressedKeyCode, m_pressedMouseButtons, m_releasedKeyCode, m_selectionPolygon, m_startDragPoint, m_wasClickOnXAxis, m_wasClickOnYAxis, m_wasKeyBoardDragging, m_wasMouseDragging, m_xDelta, m_xRange, m_xRegionRangeEnd, m_xRegionRangeStart, m_yDelta, m_yRange, m_yRegionRangeEnd, m_yRegionRangeStart, and msp_integrationScope.

Referenced by pappso::MassSpecTracePlotContext::initialize(), and pappso::MassSpecTracePlotContext::initialize().

operator=()

BasePlotContext & pappso::BasePlotContext::operator= ( const BasePlotContext &  other )

delete

recordDragDirections()

DragDirections pappso::BasePlotContext::recordDragDirections

(

)

Definition at line 852 of file baseplotcontext.cpp.

{
  int drag_directions = static_cast<int>(DragDirections::NOT_SET);
 
  if(m_currentDragPoint.x() > m_startDragPoint.x())
    drag_directions |= static_cast<int>(DragDirections::LEFT_TO_RIGHT);
  else
    drag_directions |= static_cast<int>(DragDirections::RIGHT_TO_LEFT);
 
  if(m_currentDragPoint.y() > m_startDragPoint.y())
    drag_directions |= static_cast<int>(DragDirections::BOTTOM_TO_TOP);
  else
    drag_directions |= static_cast<int>(DragDirections::TOP_TO_BOTTOM);
 
  // qDebug() << "DragDirections:" << drag_directions;
 
  m_dragDirections = static_cast<DragDirections>(drag_directions);
 
  return static_cast<DragDirections>(drag_directions);
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, m_currentDragPoint, m_dragDirections, m_startDragPoint, pappso::NOT_SET, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

Referenced by pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor().

registerJsConstructor()

void pappso::BasePlotContext::registerJsConstructor ( QJSEngine *  engine )

static

Definition at line 1007 of file baseplotcontext.cpp.

{
  // qDebug() << "Now registering the JS constructor for BasePlotContext.";
 
  if(!engine)
    {
      qFatal() << "Cannot register class: engine is null";
      return;
    }
 
  // Register the meta object as a constructor
  QJSValue jsMetaObject =
    engine->newQMetaObject(&BasePlotContext::staticMetaObject);
  engine->globalObject().setProperty("BasePlotContext", jsMetaObject);
 
  QJSValue enumObject = engine->newObject();
  enumObject.setProperty("NOT_SET",
                         static_cast<int>(pappso::DragDirections::NOT_SET));
  enumObject.setProperty(
    "LEFT_TO_RIGHT", static_cast<int>(pappso::DragDirections::LEFT_TO_RIGHT));
  enumObject.setProperty(
    "RIGHT_TO_LEFT", static_cast<int>(pappso::DragDirections::RIGHT_TO_LEFT));
  enumObject.setProperty(
    "TOP_TO_BOTTOM", static_cast<int>(pappso::DragDirections::TOP_TO_BOTTOM));
  enumObject.setProperty(
    "BOTTOM_TO_TOP", static_cast<int>(pappso::DragDirections::BOTTOM_TO_TOP));
 
  // Make it available in the global JS scope
  engine->globalObject().setProperty("DragDirections", enumObject);
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, pappso::NOT_SET, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

toString()

QString pappso::BasePlotContext::toString

(

)

const

Definition at line 874 of file baseplotcontext.cpp.

{
  QString text("Context:");
 
  text += QString(" data kind: %1").arg(static_cast<int>(m_dataKind));
 
  text += QString(" -- isMouseDragging: %1 -- wasMouseDragging: %2")
            .arg(m_isMouseDragging ? "true" : "false")
            .arg(m_wasMouseDragging ? "true" : "false");
 
  text += QString(" -- startDragPoint : (%1, %2)")
            .arg(m_startDragPoint.x())
            .arg(m_startDragPoint.y());
 
  text += QString(" -- currentDragPoint : (%1, %2)")
            .arg(m_currentDragPoint.x())
            .arg(m_currentDragPoint.y());
 
  text += QString(" -- lastCursorHoveredPoint : (%1, %2)")
            .arg(m_lastCursorHoveredPoint.x())
            .arg(m_lastCursorHoveredPoint.y());
 
  text += dragDirectionsToString();
 
  // The integration scope
  text += " -- Integration scope: ";
  text += msp_integrationScope->toString();
  text += " -- ";
 
  text +=
    QString(" -- xRange: (%1, %2)").arg(m_xRange.lower).arg(m_xRange.upper);
 
  text +=
    QString(" -- yRange: (%1, %2)").arg(m_yRange.lower).arg(m_yRange.upper);
 
  text += QString(" -- wasClickOnXAxis: %1")
            .arg(m_wasClickOnXAxis ? "true" : "false");
  text += QString(" -- wasClickOnYAxis: %1")
            .arg(m_wasClickOnYAxis ? "true" : "false");
  text += QString(" -- isMeasuringDistance: %1")
            .arg(m_isMeasuringDistance ? "true" : "false");
 
  text += QString(" -- xRegionRangeStart: %1 -- xRegionRangeEnd: %2")
            .arg(m_xRegionRangeStart)
            .arg(m_xRegionRangeEnd);
 
  text += QString(" -- yRegionRangeStart: %1 -- yRegionRangeEnd: %2")
            .arg(m_yRegionRangeStart)
            .arg(m_yRegionRangeEnd);
 
  text += QString(" -- xDelta: %1 -- yDelta: %2").arg(m_xDelta).arg(m_yDelta);
 
  text += QString(" -- pressedKeyCode: %1").arg(m_pressedKeyCode);
 
  // Qt::NoModifier0x00000000No modifier key is pressed.
  // Qt::ShiftModifier0x02000000A Shift key on the keyboard is pressed.
  // Qt::ControlModifier0x04000000A Ctrl key on the keyboard is pressed.
  // Qt::AltModifier0x08000000An Alt key on the keyboard is pressed.
  // Qt::MetaModifier0x10000000A Meta key on the keyboard is pressed.
  // Qt::KeypadModifier0x20000000A keypad button is pressed.
  // Qt::GroupSwitchModifier0x40000000X11 only (unless activated on Windows by a
  // command line argument).
  //                                       A Mode_switch key on the keyboard is
  //                                       pressed.
 
  text += QString(" -- keyboardModifiers: ");
 
  if(m_keyboardModifiers == Qt::NoModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::NoModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::ShiftModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::ShiftModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::ControlModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::ControlModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::AltModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::AltModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::MetaModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::MetaModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::KeypadModifier)
    text += QString("%1 - ").arg(qtKeyboardModifierMap[Qt::KeypadModifier]);
 
  if(static_cast<int>(m_keyboardModifiers) & Qt::GroupSwitchModifier)
    text +=
      QString("%1 - ").arg(qtKeyboardModifierMap[Qt::GroupSwitchModifier]);
 
  text += QString(" -- lastPressedMouseButton: %1")
            .arg(qtMouseButtonsMap[m_lastPressedMouseButton]);
 
  text += QString(" -- lastReleasedMouseButton: %1")
            .arg(qtMouseButtonsMap[m_lastReleasedMouseButton]);
 
  text += QString(" -- pressedMouseButtons: %1")
            .arg(qtMouseButtonsMap[m_pressedMouseButtons]);
 
  text += QString(" -- mouseButtonsAtMousePress: %1")
            .arg(qtMouseButtonsMap[m_mouseButtonsAtMousePress]);
 
  text += QString(" -- mouseButtonsAtMouseRelease: %1")
            .arg(qtMouseButtonsMap[m_mouseButtonsAtMouseRelease]);
 
  return text;
}

References dragDirectionsToString(), m_currentDragPoint, m_dataKind, m_isMeasuringDistance, m_isMouseDragging, m_keyboardModifiers, m_lastCursorHoveredPoint, m_lastPressedMouseButton, m_lastReleasedMouseButton, m_mouseButtonsAtMousePress, m_mouseButtonsAtMouseRelease, m_pressedKeyCode, m_pressedMouseButtons, m_startDragPoint, m_wasClickOnXAxis, m_wasClickOnYAxis, m_wasMouseDragging, m_xDelta, m_xRange, m_xRegionRangeEnd, m_xRegionRangeStart, m_yDelta, m_yRange, m_yRegionRangeEnd, m_yRegionRangeStart, msp_integrationScope, pappso::qtKeyboardModifierMap, and pappso::qtMouseButtonsMap.

Referenced by pappso::MassSpecTracePlotContext::toString().

updateIntegrationScope()

void pappso::BasePlotContext::updateIntegrationScope

(

)

Definition at line 251 of file baseplotcontext.cpp.

{
  // qDebug();
 
  // By essence, IntegrationScope is 1D scope. The point of the scope is the
  // left bottom point, and then we document the width.
 
  double x_range_start = std::min(m_currentDragPoint.x(), m_startDragPoint.x());
  double x_range_end   = std::max(m_currentDragPoint.x(), m_startDragPoint.x());
 
  double y_position = m_startDragPoint.y();
 
  QPointF point(x_range_start, y_position);
  double width = x_range_end - x_range_start;
 
  // qDebug() << "Going to create an integration scope with point:" << point
  //          << "and width:" << width;
  msp_integrationScope = std::make_shared<IntegrationScope>(point, width);
  // qDebug() << "Created integration scope:" <<
  // msp_integrationScope->toString();
}

References m_currentDragPoint, m_startDragPoint, and msp_integrationScope.

Referenced by pappso::BasePlotWidget::updateIntegrationScope().

updateIntegrationScopeRect()

void pappso::BasePlotContext::updateIntegrationScopeRect

(

)

Definition at line 274 of file baseplotcontext.cpp.

{
  // qDebug();
 
  // By essence, IntegrationScopeRect is a squared rectangle scope. The point of
  // the scope is the left bottom point, and then we document the width and the
  // height.
 
  /* Like this:
*
+---------------------------+  -
|                           |  |
|                           |  |
|                           |  m_height
|                           |  |
|                           |  |
P---------------------------+  -
 
|--------- m_width ---------|
 
*/
 
  // We need to find the point that is actually the left bottom point.
 
  QPointF point;
  double width  = 0;
  double height = 0;
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      point.rx() = m_startDragPoint.x();
      point.ry() = m_startDragPoint.y();
      width      = m_currentDragPoint.x() - point.rx();
      height     = m_currentDragPoint.y() - point.ry();
      // qDebug() << "left to right - bottom to top";
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      point.rx() = m_currentDragPoint.x();
      point.ry() = m_currentDragPoint.y();
      width      = m_startDragPoint.x() - m_currentDragPoint.x();
      height     = m_startDragPoint.y() - m_currentDragPoint.y();
      // qDebug() << "right to left - bottom to top";
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      point.rx() = m_startDragPoint.x();
      point.ry() = m_currentDragPoint.y();
      width      = m_currentDragPoint.x() - m_startDragPoint.x();
      height     = m_startDragPoint.y() - m_currentDragPoint.y();
      // qDebug() << "left to right - top to bottom";
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      point.rx() = m_currentDragPoint.x();
      point.ry() = m_currentDragPoint.y();
      width      = m_startDragPoint.x() - m_currentDragPoint.x();
      height     = m_startDragPoint.y() - m_currentDragPoint.y();
      // qDebug() << "right to left - top to bottom";
    }
 
  // qDebug() << "The data used to update the integration scope:";
  // qDebug() << "Point:" << point << "width:" << width << "height:" << height;
  //
  // qDebug() << "The integration scope before update:" << mpa_integrationScope;
  //
  // qDebug() << "Will update IntegrationScopeRect with:" << point << "width"
  //          << width << "height" << height;
  msp_integrationScope =
    std::make_shared<IntegrationScopeRect>(point, width, height);
 
  // if(typeid(*mpa_integrationScope) == typeid(IntegrationScopeInterface))
  //   qDebug() << "The pointer is of type IntegrationScopeInterface";
  // if(typeid(*mpa_integrationScope) == typeid(IntegrationScope))
  //   qDebug() << "The pointer is of type IntegrationScope";
  // if(typeid(*mpa_integrationScope) == typeid(IntegrationScopeRect))
  //   qDebug() << "The pointer is of type IntegrationScopeRect";
  // if(typeid(*mpa_integrationScope) == typeid(IntegrationScopeRhomb))
  //   qDebug() << "The pointer is of type IntegrationScopeRhomb";
  //
  // qDebug() << "The integration scope right after update:"
  //          << mpa_integrationScope;
  //
  // if(!mpa_integrationScope->getPoint(point))
  //   qFatal("Could not get point.");
  // qDebug() << "The point:" << point;
  // if(!mpa_integrationScope->getWidth(width))
  //   qFatal("Oh no!!!! width");
  // if(!mpa_integrationScope->getWidth(height))
  //   qFatal("Oh no!!!! height");
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, m_currentDragPoint, m_dragDirections, m_startDragPoint, msp_integrationScope, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

Referenced by pappso::BasePlotWidget::updateIntegrationScopeRect().

updateIntegrationScopeRhomb()

void pappso::BasePlotContext::updateIntegrationScopeRhomb

(

)

Definition at line 696 of file baseplotcontext.cpp.

{
  // qDebug() << toString();
 
  // By essence, IntegrationScopeRhomb is a rhomboid polygon. Just set the
  // points. There are two kinds of rhomboid integration scopes: horizontal and
  // vertical.
 
  /*
                      +----------+
                      |          |
                     |          |
                    |          |
                   |          |
                  |          |
                 |          |
                |          |
                +----------+
                ----width---
*/
 
  // As visible here, the fixed size of the rhomboid (using the S key in the
  // plot widget) is the *horizontal* side (that is, the rhomboid has a non-0
  // width)..
 
  // However, it might be useful to be able to draw rhomboid integration scopes
  // like this, that would correspond to the rhomboid above after a transpose
  // operation.
 
  /*
                                 +
                               . |
                             .   |
                           .     |
                         .       +
                       .       .
                     .       .
                   .       .
                 +       .
               | |     .
      height   | |   .
               | | .
                 +
 
*/
 
  // As visible here, the fixed size of the rhomboid (using the S key in the
  // plot widget) is the vertical side (that is, the rhomboid has a non-0
  // height).
 
  // The general rule is thus that when the m_integrationScopeRhombWidth is
  // not-0, then the first shape is considered, while when the
  // m_integrationScopeRhombHeight is non-0, then the second shape is
  // considered.
 
  // This function is called when the user has dragged the cursor (left or right
  // button, not for or for integration, respectively) with the 'Alt' modifier
  // key pressed, so that they want to perform a rhomboid integration scope
  // calculation.
 
  // Of course, the integration scope in the context might not be a rhomboid
  // scope, because we might enter this function as a very firt switch from
  // scope or scopeRect to scopeRhomb. The only indication we have to direct the
  // creation of a horizontal or vertical rhomboid is the
  // m_integrationScopeRhombWidth/m_integrationScopeRhombHeight recorded in the
  // plot widget that owns this plot context.
 
  // qDebug() << "In updateIntegrationScopeRhomb, m_integrationScopeRhombWidth:"
  //          << m_integrationScopeRhombWidth
  //          << "and m_integrationScopeRhombHeight:"
  //          << m_integrationScopeRhombHeight;
 
  if(!m_integrationScopeRhombWidth && !m_integrationScopeRhombHeight)
    qFatal(
      "Both m_integrationScopeRhombWidth and m_integrationScopeRhombHeight of "
      "rhomboid integration scope cannot be 0.");
 
  if(m_integrationScopeRhombWidth != 0)
    return updateIntegrationScopeRhombHorizontal();
  else if(m_integrationScopeRhombHeight != 0)
    return updateIntegrationScopeRhombVertical();
}

References m_integrationScopeRhombHeight, m_integrationScopeRhombWidth, updateIntegrationScopeRhombHorizontal(), and updateIntegrationScopeRhombVertical().

Referenced by pappso::BasePlotWidget::updateIntegrationScopeRhomb().

updateIntegrationScopeRhombHorizontal()

void pappso::BasePlotContext::updateIntegrationScopeRhombHorizontal

(

)

Definition at line 382 of file baseplotcontext.cpp.

{
  // qDebug() << toString();
 
  /*
                     4+----------+3
                      |          |
                     |          |
                    |          |
                   |          |
                  |          |
                 |          |
                |          |
               1+----------+2
                ----width---
*/
 
  // As visible here, the fixed size of the rhomboid (using the S key in the
  // plot widget) is the horizontal side.
 
  // The points are numbered in a counterclockwise manner, starting from the
  // starting drag point. The width side is right of the start drag point if
  // the user drags from left to right and left of the start drag point if
  // the user drags from left to right. In the figure above, the user
  // has dragged the mouse from point 1 and to the right and upwards.
  // Thus the width side is right of point 1. Because the numbering
  // is counterclockwise, that point happens to be numbered 2.
 
  // If the user had draggged the mouse starting at point 3 and to the left
  // and to the bottom, then point 3 above would be point 1, point 4
  // would be point 2 because the width side is left of the start
  // drag point; point 1 would be point 3 and finally the last point
  // would be at point 2.
 
  // Sanity check
  if(m_integrationScopeRhombWidth == 0)
    qFatal(
      "The m_integrationScopeRhombWidth of the fixed rhomboid side cannot be "
      "0.");
 
  QPointF point;
  std::vector<QPointF> points;
 
  // Fill-in the points in the vector in the order they are created
  // while drawing the rhomboid shape. Thus, the first point (start of the
  // mouse click & drag operation is always the same.
 
  point.rx() = m_startDragPoint.x();
  point.ry() = m_startDragPoint.y();
  points.push_back(point);
  // qDebug() << "Start point:" << point;
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      // Second point.
      point.rx() = m_startDragPoint.x() + m_integrationScopeRhombWidth;
      point.ry() = m_startDragPoint.y();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx() + m_integrationScopeRhombWidth;
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      // Second point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx() - m_integrationScopeRhombWidth;
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_startDragPoint.rx() - m_integrationScopeRhombWidth;
      point.ry() = m_startDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      // Second point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx() + m_integrationScopeRhombWidth;
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_startDragPoint.x() + m_integrationScopeRhombWidth;
      point.ry() = m_startDragPoint.y();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      // Second point.
      point.rx() = m_startDragPoint.x() - m_integrationScopeRhombWidth;
      point.ry() = m_startDragPoint.y();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx() - m_integrationScopeRhombWidth;
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  msp_integrationScope = std::make_shared<IntegrationScopeRhomb>(points);
 
  // qDebug() << "Created an integration scope horizontal rhomboid with"
  //          << points.size() << "points:" << msp_integrationScope->toString();
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, m_currentDragPoint, m_dragDirections, m_integrationScopeRhombWidth, m_startDragPoint, msp_integrationScope, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

Referenced by updateIntegrationScopeRhomb().

updateIntegrationScopeRhombVertical()

void pappso::BasePlotContext::updateIntegrationScopeRhombVertical

(

)

Definition at line 537 of file baseplotcontext.cpp.

{
  // qDebug() << toString();
 
  /*
   *                                       +3
   *                                     . |
   *                                   .   |
   *                                 .     |
   *                               .       +2
   *                             .       .
   *                           .       .
   *                         .       .
   *                      4+       .
   *                     | |     .
   *            height   | |   .
   *                     | | .
   *                      1+
   *
   */
 
  // As visible here, the fixed size of the rhomboid (using the S key in the
  // plot widget) is the vertical side.
 
  // The points are numbered in a counterclockwise manner, starting from the
  // starting drag point. The height side is below the start drag point if
  // the user drags from top to bottom and above the start drag point if
  // the user drags from bottom to top. In the figure above, the user
  // has dragged the mouse from point 1 and to the right and upwards.
  // Thus the height side is above the point 1. Because the numbering
  // is counterclockwise, that point happens to be numbered 4.
 
  // If the user had draggged the mouse starting at point 3 and to the left
  // and to the bottom, then point 3 above would be point 1, point 4
  // would be ponit 2, point 1 would be point 3 and finally, because
  // the dragging is from top to bottom, the last point would be at point 2
  // above, because the height side of the rhomboid is below the start
  // drag point.
 
  // Sanity check
  if(m_integrationScopeRhombHeight == 0)
    qFatal("The height of the fixed rhomboid side cannot be 0.");
 
  QPointF point;
  std::vector<QPointF> points;
 
  // Fill-in the points in the vector in the order they are created
  // while drawing the rhomboid shape. Thus, the first point (start of the
  // mouse click & drag operation is always the same, the leftmost bottom point
  // of the drawing above (point 1).
 
  point.rx() = m_startDragPoint.x();
  point.ry() = m_startDragPoint.y();
  points.push_back(point);
  // qDebug() << "Start point:" << point;
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      // Second point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry() + m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_startDragPoint.x();
      point.ry() = m_startDragPoint.y() + m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::BOTTOM_TO_TOP))
    {
      // Second point.
      point.rx() = m_startDragPoint.rx();
      point.ry() = m_startDragPoint.ry() + m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry() + m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_currentDragPoint.x();
      point.ry() = m_currentDragPoint.y();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::LEFT_TO_RIGHT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      // Second point.
      point.rx() = m_startDragPoint.x();
      point.ry() = m_startDragPoint.y() - m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry() - m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  if(static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::RIGHT_TO_LEFT) &&
     static_cast<int>(m_dragDirections) &
       static_cast<int>(DragDirections::TOP_TO_BOTTOM))
    {
      // Second point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry();
      points.push_back(point);
      // qDebug() << "Second point:" << point;
 
      // Third point.
      point.rx() = m_currentDragPoint.rx();
      point.ry() = m_currentDragPoint.ry() - m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Third point:" << point;
 
      // Fourth point.
      point.rx() = m_startDragPoint.rx();
      point.ry() = m_startDragPoint.ry() - m_integrationScopeRhombHeight;
      points.push_back(point);
      // qDebug() << "Last point:" << point;
    }
 
  msp_integrationScope = std::make_shared<IntegrationScopeRhomb>(points);
 
  // qDebug() << "Created an integration scope vertical rhomboid with"
  //          << points.size() << "points:" << msp_integrationScope->toString();
}

References pappso::BOTTOM_TO_TOP, pappso::LEFT_TO_RIGHT, m_currentDragPoint, m_dragDirections, m_integrationScopeRhombHeight, m_startDragPoint, msp_integrationScope, pappso::RIGHT_TO_LEFT, and pappso::TOP_TO_BOTTOM.

Referenced by updateIntegrationScopeRhomb().

Member Data Documentation

m_currentDragPoint

QPointF pappso::BasePlotContext::m_currentDragPoint

Definition at line 103 of file baseplotcontext.h.

Referenced by pappso::BaseTracePlotWidget::axisRescale(), pappso::BasePlotWidget::calculateDragDeltas(), clone(), pappso::BasePlotWidget::dragDirection(), initialize(), pappso::BasePlotWidget::isVerticalDisplacementAboveThreshold(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseReleaseHandlerRightButton(), recordDragDirections(), toString(), updateIntegrationScope(), pappso::BasePlotWidget::updateIntegrationScope(), updateIntegrationScopeRect(), updateIntegrationScopeRhombHorizontal(), and updateIntegrationScopeRhombVertical().

m_dataKind

Enums::DataKind pappso::BasePlotContext::m_dataKind = Enums::DataKind::unset

Definition at line 92 of file baseplotcontext.h.

Referenced by pappso::DriftSpecTracePlotWidget::DriftSpecTracePlotWidget(), pappso::MassSpecTracePlotWidget::MassSpecTracePlotWidget(), pappso::MassSpecTracePlotWidget::MassSpecTracePlotWidget(), pappso::TicXicChromTracePlotWidget::TicXicChromTracePlotWidget(), initialize(), and toString().

m_dragDirections

DragDirections pappso::BasePlotContext::m_dragDirections = DragDirections::NOT_SET

Definition at line 105 of file baseplotcontext.h.

Referenced by clone(), pappso::MassSpecTracePlotWidget::deconvoluteChargedState(), pappso::MassSpecTracePlotWidget::deconvoluteIsotopicCluster(), dragDirectionsToString(), pappso::BasePlotWidget::drawXScopeSpanFeatures(), pappso::BasePlotWidget::drawYScopeSpanFeatures(), initialize(), recordDragDirections(), updateIntegrationScopeRect(), updateIntegrationScopeRhombHorizontal(), and updateIntegrationScopeRhombVertical().

m_integrationScopeRhombHeight

double pappso::BasePlotContext::m_integrationScopeRhombHeight = 0

Definition at line 110 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::updateIntegrationScopeDrawing(), updateIntegrationScopeRhomb(), pappso::BasePlotWidget::updateIntegrationScopeRhomb(), and updateIntegrationScopeRhombVertical().

m_integrationScopeRhombWidth

double pappso::BasePlotContext::m_integrationScopeRhombWidth = 0

Definition at line 109 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::updateIntegrationScopeDrawing(), updateIntegrationScopeRhomb(), pappso::BasePlotWidget::updateIntegrationScopeRhomb(), and updateIntegrationScopeRhombHorizontal().

m_isKeyBoardDragging

bool pappso::BasePlotContext::m_isKeyBoardDragging = false

Definition at line 97 of file baseplotcontext.h.

Referenced by clone(), and initialize().

m_isLeftPseudoButtonKeyPressed

bool pappso::BasePlotContext::m_isLeftPseudoButtonKeyPressed = false

Definition at line 98 of file baseplotcontext.h.

Referenced by clone(), initialize(), and pappso::BasePlotWidget::mousePseudoButtonKeyReleaseEvent().

m_isMeasuringDistance

bool pappso::BasePlotContext::m_isMeasuringDistance = false

Definition at line 123 of file baseplotcontext.h.

Referenced by clone(), pappso::BasePlotWidget::drawSelectionRectangleAndPrepareZoom(), pappso::BasePlotWidget::drawXScopeSpanFeatures(), pappso::BasePlotWidget::drawYScopeSpanFeatures(), initialize(), pappso::MassSpecTracePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerLeftButtonDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerRightButtonDraggingCursor(), and toString().

m_isMouseDragging

bool pappso::BasePlotContext::m_isMouseDragging = false

Definition at line 94 of file baseplotcontext.h.

Referenced by clone(), dragDirectionsToString(), initialize(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerNotDraggingCursor(), pappso::BasePlotWidget::mouseReleaseHandler(), pappso::MassSpecTracePlotWidget::mouseReleaseHandler(), and toString().

m_isRightPseudoButtonKeyPressed

bool pappso::BasePlotContext::m_isRightPseudoButtonKeyPressed = false

Definition at line 99 of file baseplotcontext.h.

Referenced by clone(), initialize(), and pappso::BasePlotWidget::mousePseudoButtonKeyReleaseEvent().

m_keyboardModifiers

Qt::KeyboardModifiers pappso::BasePlotContext::m_keyboardModifiers

Definition at line 143 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisDoubleClickHandler(), pappso::BaseTracePlotWidget::axisDoubleClickHandler(), pappso::BaseTracePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisReframe(), pappso::BaseTracePlotWidget::axisRescale(), pappso::BaseTracePlotWidget::axisZoom(), clone(), pappso::BasePlotWidget::directionKeyPressEvent(), initialize(), pappso::BasePlotWidget::keyPressEvent(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerLeftButtonDraggingCursor(), pappso::BasePlotWidget::mousePseudoButtonKeyReleaseEvent(), pappso::BasePlotWidget::mouseReleaseHandler(), pappso::BasePlotWidget::mouseReleaseHandlerLeftButton(), toString(), and pappso::BasePlotWidget::updateIntegrationScopeDrawing().

m_lastCursorHoveredPoint

QPointF pappso::BasePlotContext::m_lastCursorHoveredPoint

Definition at line 104 of file baseplotcontext.h.

Referenced by clone(), pappso::BasePlotWidget::horizontalGetGraphCoordNewPointCountPixels(), initialize(), pappso::BasePlotWidget::mouseMoveHandler(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerNotDraggingCursor(), pappso::BasePlotWidget::mousePressHandler(), pappso::BasePlotWidget::mousePseudoButtonKeyReleaseEvent(), pappso::BasePlotWidget::mouseReleaseHandler(), toString(), and pappso::BasePlotWidget::verticalGetGraphCoordNewPointCountPixels().

m_lastPressedMouseButton

Qt::MouseButtons pappso::BasePlotContext::m_lastPressedMouseButton

Definition at line 145 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::mousePressHandler(), and toString().

m_lastReleasedMouseButton

Qt::MouseButtons pappso::BasePlotContext::m_lastReleasedMouseButton

Definition at line 146 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::mouseReleaseHandler(), and toString().

m_mouseButtonsAtMousePress

Qt::MouseButtons pappso::BasePlotContext::m_mouseButtonsAtMousePress

Definition at line 150 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::MassSpecTracePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mousePressHandler(), and toString().

m_mouseButtonsAtMouseRelease

Qt::MouseButtons pappso::BasePlotContext::m_mouseButtonsAtMouseRelease

Definition at line 151 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::mouseReleaseHandler(), and toString().

m_pressedKeyCode

int pappso::BasePlotContext::m_pressedKeyCode

Definition at line 140 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::keyPressEvent(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::mouseMoveHandlerLeftButtonDraggingCursor(), and toString().

m_pressedMouseButtons

Qt::MouseButtons pappso::BasePlotContext::m_pressedMouseButtons

Definition at line 148 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisDoubleClickHandler(), pappso::BaseTracePlotWidget::axisDoubleClickHandler(), clone(), initialize(), pappso::BasePlotWidget::mouseMoveHandler(), pappso::BasePlotWidget::mousePressHandler(), pappso::BasePlotWidget::mouseReleaseHandler(), and toString().

m_releasedKeyCode

int pappso::BasePlotContext::m_releasedKeyCode

Definition at line 141 of file baseplotcontext.h.

Referenced by clone(), initialize(), and pappso::BasePlotWidget::keyReleaseEvent().

m_selectionPolygon

SelectionPolygon pappso::BasePlotContext::m_selectionPolygon

Definition at line 108 of file baseplotcontext.h.

Referenced by clone(), and initialize().

m_startDragPoint

QPointF pappso::BasePlotContext::m_startDragPoint

Definition at line 102 of file baseplotcontext.h.

Referenced by pappso::BaseTracePlotWidget::axisRescale(), pappso::BasePlotWidget::calculateDragDeltas(), clone(), pappso::BasePlotWidget::dragDirection(), initialize(), pappso::BasePlotWidget::isVerticalDisplacementAboveThreshold(), pappso::BasePlotWidget::keyReleaseEvent(), pappso::BasePlotWidget::mousePressHandler(), pappso::BasePlotWidget::mouseReleaseHandlerRightButton(), recordDragDirections(), toString(), updateIntegrationScope(), pappso::BasePlotWidget::updateIntegrationScope(), updateIntegrationScopeRect(), updateIntegrationScopeRhombHorizontal(), and updateIntegrationScopeRhombVertical().

m_wasClickOnXAxis

bool pappso::BasePlotContext::m_wasClickOnXAxis = false

Definition at line 120 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), pappso::BasePlotWidget::axisRescale(), pappso::BaseTracePlotWidget::axisRescale(), clone(), initialize(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerLeftButtonDraggingCursor(), pappso::BasePlotWidget::mousePressHandler(), pappso::BasePlotWidget::mouseReleaseHandlerLeftButton(), and toString().

m_wasClickOnYAxis

bool pappso::BasePlotContext::m_wasClickOnYAxis = false

Definition at line 121 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), clone(), initialize(), pappso::BasePlotWidget::mouseMoveHandlerDraggingCursor(), pappso::BasePlotWidget::mouseMoveHandlerLeftButtonDraggingCursor(), pappso::BasePlotWidget::mousePressHandler(), pappso::BasePlotWidget::mouseReleaseHandlerLeftButton(), and toString().

m_wasKeyBoardDragging

bool pappso::BasePlotContext::m_wasKeyBoardDragging = false

Definition at line 100 of file baseplotcontext.h.

Referenced by clone(), and initialize().

m_wasMouseDragging

bool pappso::BasePlotContext::m_wasMouseDragging = false

Definition at line 95 of file baseplotcontext.h.

Referenced by clone(), initialize(), pappso::BasePlotWidget::mouseReleaseHandler(), and toString().

m_xDelta

double pappso::BasePlotContext::m_xDelta = 0

Definition at line 137 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), pappso::BasePlotWidget::axisRescale(), pappso::BasePlotWidget::calculateDragDeltas(), clone(), pappso::MassSpecTracePlotWidget::computeResolvingPower(), pappso::MassSpecTracePlotWidget::deconvolute(), pappso::MassSpecTracePlotWidget::deconvoluteIsotopicCluster(), pappso::BasePlotWidget::drawXScopeSpanFeatures(), initialize(), and toString().

m_xRange

QCPRange pappso::BasePlotContext::m_xRange

Definition at line 113 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), clone(), pappso::BaseColorMapPlotWidget::currentXaxisRangeIndices(), initialize(), pappso::BasePlotWidget::mouseWheelHandler(), toString(), and pappso::BasePlotWidget::updateContextXandYAxisRanges().

m_xRegionRangeEnd

double pappso::BasePlotContext::m_xRegionRangeEnd = std::numeric_limits<double>::min()

Definition at line 132 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisReframe(), pappso::BaseTracePlotWidget::axisReframe(), pappso::BasePlotWidget::axisZoom(), pappso::BaseTracePlotWidget::axisZoom(), clone(), pappso::MassSpecTracePlotWidget::computeResolvingPower(), pappso::MassSpecTracePlotWidget::deconvoluteChargedState(), pappso::MassSpecTracePlotWidget::deconvoluteIsotopicCluster(), initialize(), toString(), and pappso::BasePlotWidget::updateIntegrationScopeDrawing().

m_xRegionRangeStart

double pappso::BasePlotContext::m_xRegionRangeStart = std::numeric_limits<double>::min()

Definition at line 131 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisReframe(), pappso::BaseTracePlotWidget::axisReframe(), pappso::BasePlotWidget::axisZoom(), pappso::BaseTracePlotWidget::axisZoom(), clone(), pappso::MassSpecTracePlotWidget::computeResolvingPower(), pappso::MassSpecTracePlotWidget::deconvoluteChargedState(), pappso::MassSpecTracePlotWidget::deconvoluteIsotopicCluster(), initialize(), toString(), and pappso::BasePlotWidget::updateIntegrationScopeDrawing().

m_yDelta

double pappso::BasePlotContext::m_yDelta = 0

Definition at line 138 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), pappso::BasePlotWidget::axisRescale(), pappso::BasePlotWidget::calculateDragDeltas(), clone(), pappso::BasePlotWidget::drawYScopeSpanFeatures(), initialize(), and toString().

m_yRange

QCPRange pappso::BasePlotContext::m_yRange

Definition at line 114 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisPan(), pappso::BaseTracePlotWidget::axisPan(), clone(), pappso::BaseColorMapPlotWidget::currentYaxisRangeIndices(), initialize(), pappso::BasePlotWidget::mouseWheelHandler(), toString(), and pappso::BasePlotWidget::updateContextXandYAxisRanges().

m_yRegionRangeEnd

double pappso::BasePlotContext::m_yRegionRangeEnd = std::numeric_limits<double>::min()

Definition at line 135 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisReframe(), pappso::BaseTracePlotWidget::axisReframe(), pappso::BasePlotWidget::axisZoom(), pappso::BaseTracePlotWidget::axisZoom(), clone(), initialize(), toString(), and pappso::BasePlotWidget::updateIntegrationScopeDrawing().

m_yRegionRangeStart

double pappso::BasePlotContext::m_yRegionRangeStart = std::numeric_limits<double>::min()

Definition at line 134 of file baseplotcontext.h.

Referenced by pappso::BasePlotWidget::axisReframe(), pappso::BaseTracePlotWidget::axisReframe(), pappso::BasePlotWidget::axisZoom(), pappso::BaseTracePlotWidget::axisZoom(), clone(), initialize(), toString(), and pappso::BasePlotWidget::updateIntegrationScopeDrawing().

msp_integrationScope

IntegrationScopeBaseCstSPtr pappso::BasePlotContext::msp_integrationScope = nullptr

Definition at line 107 of file baseplotcontext.h.

Referenced by BasePlotContext(), clone(), pappso::BasePlotWidget::drawXScopeSpanFeatures(), pappso::BasePlotWidget::drawYScopeSpanFeatures(), initialize(), pappso::BasePlotWidget::resetSelectionRectangle(), toString(), updateIntegrationScope(), pappso::BasePlotWidget::updateIntegrationScopeDrawing(), pappso::BasePlotWidget::updateIntegrationScopeHorizontalRhomb(), updateIntegrationScopeRect(), pappso::BasePlotWidget::updateIntegrationScopeRect(), updateIntegrationScopeRhombHorizontal(), updateIntegrationScopeRhombVertical(), and pappso::BasePlotWidget::updateIntegrationScopeVerticalRhomb().

Property Documentation

currentDragPoint

QPointF pappso::BasePlotContext::currentDragPoint

Definition at line 63 of file baseplotcontext.h.

dragDirections

DragDirections pappso::BasePlotContext::dragDirections

Definition at line 65 of file baseplotcontext.h.

isKeyBoardDragging

bool pappso::BasePlotContext::isKeyBoardDragging

Definition at line 58 of file baseplotcontext.h.

isLeftPseudoButtonKeyPressed

bool pappso::BasePlotContext::isLeftPseudoButtonKeyPressed

Definition at line 59 of file baseplotcontext.h.

isMouseDragging

bool pappso::BasePlotContext::isMouseDragging

Definition at line 56 of file baseplotcontext.h.

isRightPseudoButtonKeyPressed

bool pappso::BasePlotContext::isRightPseudoButtonKeyPressed

Definition at line 60 of file baseplotcontext.h.

keyboardModifiers

Qt::KeyboardModifiers pappso::BasePlotContext::keyboardModifiers

Definition at line 74 of file baseplotcontext.h.

lastCursorHoveredPoint

QPointF pappso::BasePlotContext::lastCursorHoveredPoint

Definition at line 64 of file baseplotcontext.h.

lastPressedMouseButton

Qt::MouseButtons pappso::BasePlotContext::lastPressedMouseButton

Definition at line 75 of file baseplotcontext.h.

lastReleasedMouseButton

Qt::MouseButtons pappso::BasePlotContext::lastReleasedMouseButton

Definition at line 76 of file baseplotcontext.h.

mouseButtonsAtMousePress

Qt::MouseButtons pappso::BasePlotContext::mouseButtonsAtMousePress

Definition at line 78 of file baseplotcontext.h.

mouseButtonsAtMouseRelease

Qt::MouseButtons pappso::BasePlotContext::mouseButtonsAtMouseRelease

Definition at line 79 of file baseplotcontext.h.

pressedKeyCode

double pappso::BasePlotContext::pressedKeyCode

Definition at line 72 of file baseplotcontext.h.

pressedMouseButtons

Qt::MouseButtons pappso::BasePlotContext::pressedMouseButtons

Definition at line 77 of file baseplotcontext.h.

releasedKeyCode

double pappso::BasePlotContext::releasedKeyCode

Definition at line 73 of file baseplotcontext.h.

startDragPoint

QPointF pappso::BasePlotContext::startDragPoint

Definition at line 62 of file baseplotcontext.h.

wasKeyBoardDragging

bool pappso::BasePlotContext::wasKeyBoardDragging

Definition at line 61 of file baseplotcontext.h.

wasMouseDragging

bool pappso::BasePlotContext::wasMouseDragging

Definition at line 57 of file baseplotcontext.h.

xDelta

double pappso::BasePlotContext::xDelta

Definition at line 70 of file baseplotcontext.h.

xRegionRangeEnd

double pappso::BasePlotContext::xRegionRangeEnd

Definition at line 67 of file baseplotcontext.h.

xRegionRangeStart

double pappso::BasePlotContext::xRegionRangeStart

Definition at line 66 of file baseplotcontext.h.

yDelta

double pappso::BasePlotContext::yDelta

Definition at line 71 of file baseplotcontext.h.

yRegionRangeEnd

double pappso::BasePlotContext::yRegionRangeEnd

Definition at line 69 of file baseplotcontext.h.

yRegionRangeStart

double pappso::BasePlotContext::yRegionRangeStart

Definition at line 68 of file baseplotcontext.h.

---

The documentation for this class was generated from the following files:

• pappsomspp/gui/plotwidget/baseplotcontext.h
• pappsomspp/gui/plotwidget/baseplotcontext.cpp